Gateway DC-T20 - Transferring Recorded Images;Video Clips Your Computer

40
Transferring Recorded Images/Video Clips to Your
Computer
To transfer images/video clips from the camera to your computer, follow these steps:
Step 1: Installing the USB driver
Step 2: Connecting the camera to your computer
Step 3: Downloading images/video clips
Step 1: Installing the USB Driver
The USB driver on the CD-ROM is exclusively for Windows 98 and Mac OS 8.6 computers.
1. Insert the CD-ROM that came with the camera into your CD-ROM drive.
2. Follow the on-screen instructions to complete the installation.
3. After the USB driver has been installed, restart your computer.
System Requirements (Windows)
Pentium 166 MHz or higher
Windows 98/98SE/Me/2000/XP
32MB RAM or more available (64MB or
more recommended)
128MB hard disk space
CD-ROM drive
An available USB port
Color monitor (800x600, 24-bit or higher
recommended)
System Requirements (Macintosh)
PowerPC G3/G4
OS 8.6 or later
32MB RAM or more available (64MB or more
recommended)
128MB hard disk space
CD-ROM drive
An available USB port
Color monitor (800x600, 24-bit or higher
recommended)
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4840