www.gateway.com
37
Creating a RAID volume
Because RAID can be configured so many ways, this procedure
covers only the basics.
To configure RAID:
1 Start (or restart) your computer. During startup, the
RAID option screen appears. (Number and specifications
of your drives may vary from the example.)
2 While the RAID option screen is open, press CTRL+i. The
Matrix Storage Manager opens.
3 Highlight 1. Create RAID Volume, then press ENTER.
The Create Volume menu opens.
8511858.book Page 37 Monday, December 18, 2006 10:51 AM
To Next Page
Loading...
