Standard mode; O/C/S
(Open/Close/Stop).
O/S/C standard mode with
automatic closing function. When the
gate opens, it will automatically close
after automatic closing time. If a “close
the gate” command is sent during the
automatic closing time waiting time, the
automatic closing function will be
canceled.
Community mode(with
automatic closing function). When the
gate opens, any gate command will not
be responded until it closes
automatically. If user sends gate
command during the closing process,
then the gate will reopen. If a gate
command is sent during the automatic
closing waiting time, this waiting time
will be recalculated. If the gate is not
closed completely for more than three
consecutive times, the automatic
closing function will be canceled and
the gate will be closed by re-sending the
gate closing command. Note that in
community mode, the gate still has the
automatic closing function in case of
meeting obstacles.
To Next Page
Loading...
