GBA Global Bill Acceptors GBA ST1 Operation Manual
Page 31 of 37 Astrosys International Ltd
September 2011
ST1 Operations Manual Rev 2.0
10.1.2 Flashing Note guide:
The GBA ST1 has an optional illuminated, tri colour, note guide to further assist in indicating the
status of the validator to the end user.
Indication Status
Flashing Green towards note entry Unit ready to accept notes
Solid Green Unit validating
Flashing Orange away from note entry Note returning
Fading from Red to Green Unit in power up routine
Solid Red Unit out of order
10.1.3 Diagnostic LED – Note Reject Codes:
If a note is rejected then a flash code is given (the LED will flash red or orange a number of times):
Cause of Note Rejection Number of flashes
Unrecognised note 1 Red
Optical Anti String Gate was triggered 2 Red
Mechanical Anti String Gate did not close successfully 2 Orange
Note Inhibited in the configuration 3 Red
Note Inhibited by the Host 3 Orange
Note slipped or was held by the user as it was scanned 4 red
Front of the note hit the Mechanical Gate 4 Orange
Note inserted skewed 5 Red
Note is too long or two notes inserted 6 Red
To Next Page
Loading...
