CHAPTER 3: HARDWARE INSTALLATION MOUNTING THE EPM P60N LCD EXTERNAL DISPLAY
EPM 9450/9650 ADVANCED POWER QUALITY METERING SYSTEM – INSTRUCTION MANUAL 3–5
3.3 Mounting the EPM P60N LCD External Display
The EPM 9450/9650 touch-screen LCD display is available with either 6’ of cable (model
number PL9000-P60N00000) or 15’ of cable (model number PL9000-P60N10000). The
display can be mounted up to 50 feet from the meter using the meter’s internal power
supply. Or, it can be mounted up to 4000 feet from the meter using a separate power
supply. Cable connects the display easily to any of the RS-485 ports.
A bezel and a gasket are included with the display. Since the display employs an LCD
screen, the viewing angle must be considered when mounting. Install the display at a
height and angle that make it easy for the operator to see and access the screen.
Figure 3-5: P60N LCD Touch Screen Display Mounting Diagram
To bezel mount the unit, do the following:
To Next Page
Loading...