EPM 9450/9650 ADVANCED POWER QUALITY METERING SYSTEM – INSTRUCTION MANUAL 6–1
EPM 9450/9650
Chapter 6: Using the External
Displays
GE
Grid Solutions
Using the External Displays
This chapter provides information on the EPM 9450/9650 meter’s external displays.
6.1 Overview
GE offers two external displays for use with the EPM 9450/9650 meter:
• EPM P60N LCD Display
•EPM P40N
PLUS
LED Display
The P60N is touch-screen LCD display that provides real-time readings, harmonics,
waveforms and phasors from EPM 9450/9650 meters. Because the display uses a
programmable address, one P60N display can act as an access tool for up to 8 meters. The
P60N display is available with either a 6’ or 15’ cable.
The P40N
PLUS
is a three-line LED display that provide easy-to-use access to the
information stored in your EPM 9450/9650 meter. The P40N
PLUS
display also features a USB
port for direct data download.
Plug one of the EPM external displays into Port 3 or 4 of the meter, using the cable supplied
with the display. The displays operate at 9600 baud. Port 3 is already factory-set to 9600
baud (see Chapter 5 for communication details). To use a display on another port,
configure that port to operate at 9600 baud with the GE Communicator Software. See the
GE Communicator Instruction Manual for instructions on configuring the meter's port.
To Next Page
Loading...