6–2 EPM 9450/9650 ADVANCED POWER QUALITY METERING SYSTEM – INSTRUCTION MANUAL
USING THE EPM P60N LCD EXTERNAL DISPLAY CHAPTER 6: USING THE EXTERNAL DISPLAYS
6.2 Using the EPM P60N LCD External Display
The EPM P60N LCD external display has a programmable address, allowing access to up to
8 meters.
The Touch Screen External Display is ready to use upon power-up. Touching the “buttons”
at the top of the screen will take you to the Groups of Readings listed in section 6.2.2. With
the “buttons” at the bottom of the screen, you can use the touch screen to review Limits
and review or change Settings on the Display and the Monitor. Also, you can Reset Max/Min
and Demand, Hour, I2T and V2T Counters, All Logs and TOU for Current Session and Month
using the Reset Button.
All screens have a Main button that will take you back to the Main screen. All screens also
have a Next button that will take you to the next group of readings. Some of the screens
have additional navigation buttons to take you to complimentary readings.
Figure 6-1: P60N Touch Screen External Display
To Next Page
Loading...