GE Grid Solutions Multilin 9450 - Page 94

6–16 EPM 9450/9650 ADVANCED POWER QUALITY METERING SYSTEM – INSTRUCTION MANUAL
USING THE EPM P40NPLUS LED EXTERNAL DISPLAY CHAPTER 6: USING THE EXTERNAL DISPLAYS
•Maximum kVA/Hz
• Minimum kVA/Hz
• Maximum Quadrant 1 Total PF
• Minimum Quadrant 1 Total PF
• Maximum Quadrant 2 Total PF
• Minimum Quadrant 2 Total PF
• Maximum Quadrant 3 Total PF
• Minimum Quadrant 3 Total PF
• Maximum Quadrant 4 Total PF
• Minimum Quadrant 4 Total PF
Group 6: Delivered Energy (Use the Left/Right arrows to access the following readings, in
order.)
• +kWatthr Quadrant 1+Quadrant 4 (Primary)
• +kVAhr Quadrant 1 (Primary)
• +kVARhr Quadrant 1 (Primary)
• +kVAhr Quadrant 4 (Primary)
• -kVARhr Quadrant 4 (Primary)
Group 7: Received Energy (Use the Left/Right arrows to access the following readings, in
order.)
• -kWatthr Quadrant 2+Quadrant 3 (Primary)
• +kVAhr Quadrant 2 (Primary)
• +kVARhr Quadrant 2 (Primary)
• +kVAhr Quadrant 3 (Primary)
• -kVARhr Quadrant 3 (Primary)
Group 8: Accumulations (Use the Left/Right arrows to access the following readings, in
order.)
•kI2t A
•kI2t B
•kI2t C
•kV2t A
•kV2t B
•kV2t C
Group 9: Phase Angles (Use the Left/Right arrows to access the following readings, in
order.)
• Phase Angle Van/bn/cn
• Phase Angle Ia/b/c
• Phase Angle Vab/bc/ca
• Phase Sequence
Navigation Map of Dynamic Readings Mode
• Use Left/Right arrow keys to navigate Readings