CHAPTER 7: MAINTENANCE M3 BREAKER MAINTENANCE
345 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL 7–13
Reset counters
Reset counter commands clear various counters.
PATH:
MAINTENANCE > M3 RESET COUNTERS
RST W1 (W2) BKR TRIP COUNT
Range: No, Yes
Default: No
Entering a "Yes" command will clear the Trip Counters, and an event - "Reset Trip
Counter" - will be recorded
RST W1 (W2) BKR ALARM COUNT
Range: No, Yes
Default: No
Entering a "Yes" command will clear the Alarm Counters, and an event - "Reset Alarm
Counter" - will be recorded
RST W1 (W2) BKR TRIP TIMES
Range: No, Yes
Default: No
Entering a "Yes" command will clear the Trip Time Counters, and an event - "Reset Trip
Time Coutner" - will be recorded
RST W1 (W2) BKR CLOSE TIMES
Range: No, Yes
Default: No
Entering a "Yes" command will clear the Close Time Counters, and an event - "Reset
Close Time Counter" - will be recorded
RST W1 (W2) BKR CHARGE TIMES
Range: No, Yes
Default: No
Entering a "Yes" command will clear the Charge Time Counters, and an event - "Reset
Charge Time Counter" - will be recorded
RESET ALL
Range: No, Yes
Default: No
Entering a "Yes" command will clear all counters, and an event - "Resets All Counters" -
will be recorded
To Next Page
Loading...
