GE 469

1–6 469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
CHAPTER 1: GETTING STARTED
Z Press the MESSAGE T or MESSAGE S key to scroll through pages,
until the
A2 METERING DATA page appears.
Z Press the
MESSAGE X or ENTER key to display the first sub-page
heading for the Metering Data actual values page:
Pressing the
MESSAGE T or MESSAGE S keys will scroll the display up and down
through the sub-page headers.
Pressing the W
MESSAGE or ESCAPE key at any sub-page heading will return the
display to the heading of the corresponding settings or actual value page.
Pressing it again, will return the display to the main menu header.
Z Press the
MESSAGE T key until the DEMAND METERING sub-page
heading appears.
At this point, pressing
MESSAGE X or ENTER key will display the messages under this
sub-page. If instead you press the
MESSAGE S key, it will return to the previous sub-
page heading. In this case,
When the symbols
 and [Z] appear on the top line, it indicates that additional sub-
pages are available and can be accessed by pressing the
MESSAGE X or ENTER key.
Z Press
MESSAGE X or ENTER while at the Demand Metering sub-page
heading to display the following:
Z Press W
MESSAGE key to return to the Demand Metering sub-page
heading.
 ACTUAL
VALUES [Z]
A2 METERING
DATA

CURRENT [
Z]
METERING

DEMAND [
Z]
METERING

POWER [
Z]
METERING
CURRENT
DEMAND: 0
Amps