GE 745 - 6.2.7 Self-test Errors

6–6 745 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
A1 STATUS CHAPTER 6: ACTUAL VALUES
6.2.7 Self-test Errors
PATH: ACTUAL VALUES  A1 STATUS  SELF-TEST ERRORS
The FLEXLOGIC EQN ERROR value displays the source of the error occurring in a
FlexLogic™ equation. The BAD SETTINGS ERROR value displays the cause of a bad setting
made while assigning setpoint values.
 SELF-TEST []
ERRORS
FLEXLOGIC EQN ERROR:
None
MESSAGE
BAD SETTINGS ERROR:
None