745 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL 1–1
745 Transformer Protection
System
Chapter 1: Getting Started
GE
Grid Solutions
Getting Started
1.1 Important Procedures
1.1.1 Cautions and Warnings
Please read this chapter to guide you through the initial setup of your new relay.
Before attempting to install or use the relay, it is imperative that all
WARNINGS and CAUTIONS in this manual are reviewed to help
prevent personal injury, equipment damage, and/or downtime.
1.1.2 Inspection Checklist
• Open the relay packaging and inspect the unit for physical damage.
• View the rear nameplate and verify that the correct model has been ordered.
• Ensure that the following items are included:
– Instruction manual
– GE EnerVista CD (includes software and relay documentation)
– Mounting screws
• For product information, instruction manual updates, and the latest software updates,
please visit the GE Multilin website at http://www.GEmultilin.com
Note
If there is any noticeable physical damage, or any of the contents listed are missing,
please contact GE Multilin immediately.
To Next Page
Loading...
