Page 12 of 53 Copyright © 2007, General Electric Company 2023486-201 Rev C
AED PRO PARTS
The following drawings show the AED Pro parts and their locations.
THE AED PRO HAS THREE MODES:
Operating Mode: Defined as having the battery installed and the lid open. This is the mode the AED Pro would be in
during an actual rescue situation.
Standby Mode: When the battery is installed, but the lid is closed. In this mode the AED Pro is not being used in a
rescue. The device will conduct its routine self-tests to ensure proper operation.
Storage Mode: When the battery is removed, such as during shipping or transport. With the battery removed, the AED
Pro is unable to perform self-tests or rescues.
RescueReady
Status Indicato
Electrode Expiration
Window
Lid
Battery Compartment
MANUAL OVERRIDE Button
Behind cover
IR Port
Color Display
Pad/Electrode Holders
Speaker
Pad/Electrode Socket
Shock Button
Latch
(push in to open)
To Next Page
Loading...
