GE Amersham Imager 680 - 6.1 Software installation and activation

6.1 Software installation and activation
System requirements
Minimum requirementParameter
Microsoft
®
Windows 7 Professional SP1 (32/64-bit)Operating system
or
Microsoft Windows 8.1 Pro (32/64-bit)
or
Microsoft Windows 10 Pro (32/64-bit)
2 GBInternal memory
Intel™ Core i7 processorProcessor
80 GBHard drive
1280 × 1024 pixelsMonitor resolution
DVD-ROM driveOther requirements
Installation sequence
Software installation is performed in the following sequence:
1
Install the Amersham Imager 680 Analysis Software.
2
A registration number is presented by the Amersham Imager 680 Analysis Software.
3
Go the main instrument to create a license key with the Amersham Imager 680
Control Software.
4
Activate the Amersham Imager 680 Analysis Software by registering with the license
key.
You need to have access to the main instrument to activate the Amersham
Imager 680 Control Software.
Note:
Amersham Imager 680 Operating Instructions 29271308 AB 201
6 Analysis software
6.1 Software installation and activation