ActionStep
To return to the Settings window select the OK button.5
Confirm that the software, Firmware and FPGA version numbers are correctly
updated.
6
Export log
Follow the instructions below to export a log from Amersham Imager 680.
ActionStep
Select the Export log button.1
Result: A text file will be created on the instrument containing the export log
file.
Insert a USB flash drive and confirm insertion by selecting the OK button.2
Result: The export log file will be transferred to the USB flash drive.
To return to the Settings view, select the OK button.3
Amersham Imager 680 Operating Instructions 29271308 AB 85
4 Installation
4.3 System settings
4.3.4 Service
To Next Page
Loading...
