GE C30

GE Multilin C30 Controller System 6-15
6 ACTUAL VALUES 6.4 RECORDS
6
6.4.3 DATA LOGGER
PATH: ACTUAL VALUES  RECORDS  DATA LOGGER
The OLDEST SAMPLE TIME represents the time at which the oldest available samples were taken. It will be static until the log
gets full, at which time it will start counting at the defined sampling rate. The NEWEST SAMPLE TIME represents the time the
most recent samples were taken. It counts up at the defined sampling rate. If the data logger channels are defined, then
both values are static.
Refer to the COMMANDS  CLEAR RECORDS menu for clearing data logger records.
 DATA LOGGER

OLDEST SAMPLE TIME:
2000/01/14 13:45:51
MESSAGE
NEWEST SAMPLE TIME:
2000/01/14 15:21:19