GE C30 User Manual

GE Multilin C30 Controller System vii
TABLE OF CONTENTS
B.2.2 READ ACTUAL VALUES OR SETTINGS (FUNCTION CODE 03/04H) ...........B-4
B.2.3 EXECUTE OPERATION (FUNCTION CODE 05H) ...........................................B-5
B.2.4 STORE SINGLE SETTING (FUNCTION CODE 06H) .......................................B-5
B.2.5 STORE MULTIPLE SETTINGS (FUNCTION CODE 10H) ................................B-6
B.2.6 EXCEPTION RESPONSES ...............................................................................B-6
B.3 FILE TRANSFERS
B.3.1 OBTAINING RELAY FILES VIA MODBUS ........................................................B-7
B.4 MEMORY MAPPING
B.4.1 MODBUS MEMORY MAP .................................................................................B-9
B.4.2 DATA FORMATS .............................................................................................B-57
C. IEC 61850
COMMUNICATIONS
C.1 OVERVIEW
C.1.1 INTRODUCTION................................................................................................C-1
C.1.2 COMMUNICATION PROFILES .........................................................................C-1
C.1.3 FILE TRANSFER BY IEC 61850 .......................................................................C-2
C.2 SERVER DATA ORGANIZATION
C.2.1 OVERVIEW........................................................................................................C-3
C.2.2 GGIO1: DIGITAL STATUS VALUES .................................................................C-3
C.2.3 GGIO2: DIGITAL CONTROL VALUES ..............................................................C-3
C.2.4 GGIO3: DIGITAL STATUS AND ANALOG VALUES FROM GOOSE DATA ....C-3
C.2.5 GGIO4: GENERIC ANALOG MEASURED VALUES.........................................C-3
C.2.6 MMXU: ANALOG MEASURED VALUES...........................................................C-4
C.2.7 PROTECTION AND OTHER LOGICAL NODES ...............................................C-4
C.3 SERVER FEATURES AND CONFIGURATION
C.3.1 BUFFERED/UNBUFFERED REPORTING........................................................C-6
C.3.2 FILE TRANSFER ...............................................................................................C-6
C.3.3 TIMESTAMPS AND SCANNING .......................................................................C-6
C.3.4 LOGICAL DEVICE NAME..................................................................................C-6
C.3.5 LOCATION.........................................................................................................C-6
C.3.6 LOGICAL NODE NAME PREFIXES ..................................................................C-7
C.3.7 CONNECTION TIMING .....................................................................................C-7
C.3.8 NON-IEC 61850 DATA ......................................................................................C-7
C.3.9 COMMUNICATION SOFTWARE UTILITIES.....................................................C-7
C.4 GENERIC SUBSTATION EVENT SERVICES: GSSE AND GOOSE
C.4.1 OVERVIEW........................................................................................................C-8
C.4.2 GSSE CONFIGURATION ..................................................................................C-8
C.4.3 FIXED GOOSE ..................................................................................................C-8
C.4.4 CONFIGURABLE GOOSE.................................................................................C-8
C.4.5 ETHERNET MAC ADDRESS FOR GSSE/GOOSE.........................................C-11
C.4.6 GSSE ID AND GOOSE ID SETTINGS ............................................................C-11
C.5 IEC 61850 IMPLEMENTATION VIA ENERVISTA UR SETUP
C.5.1 OVERVIEW......................................................................................................C-12
C.5.2 CONFIGURING IEC 61850 SETTINGS...........................................................C-13
C.5.3 ABOUT ICD FILES...........................................................................................C-14
C.5.4 CREATING AN ICD FILE WITH ENERVISTA UR SETUP ..............................C-18
C.5.5 ABOUT SCD FILES .........................................................................................C-18
C.5.6 IMPORTING AN SCD FILE WITH ENERVISTA UR SETUP...........................C-21
C.6 ACSI CONFORMANCE
C.6.1 ACSI BASIC CONFORMANCE STATEMENT.................................................C-23
C.6.2 ACSI MODELS CONFORMANCE STATEMENT ............................................C-23
C.6.3 ACSI SERVICES CONFORMANCE STATEMENT .........................................C-24
C.7 LOGICAL NODES
C.7.1 LOGICAL NODES TABLE ...............................................................................C-27
D. IEC 60870-5-104
COMMUNICATIONS
D.1 IEC 60870-5-104
D.1.1 INTEROPERABILITY DOCUMENT ...................................................................D-1
D.1.2 POINT LIST........................................................................................................D-9

GE C30 Specifications

General

Brand	GE
Model	C30
Category	Controller
Language	English