GE DigitalFlow XMT868i - Page 38

Chapter 2. Initial Setup
30 DigitalFlow™ XMT868i Startup Guide
2.3.1a Volumetric Units
6. Scroll to the desired Volumetric Units for the flow rate display and press [Enter]. Table 5 below lists the
available volumetric units.
7. Scroll to the desired number of Vol Decimal Digits (digits to the right of the decimal point) in the volumetric
flow display, and press [Enter].
Table 5: Available Volumetric Units
English Metric
GAL/S = gallons/second L/S = Liter/sec
GAL/M = gallons/minute L/M = Liter/min
GAL/H = gallons/hour L/H = Liter/hr
MGD = mega gallons/day ML/D = mega liters/day
ft3/s = Cubic ft/sec m^3/s = Cubic m/sec
ft3/m = Cubic ft/min m^3/m = Cubic m/min
ft3/h = Cubic ft/hr m^3/h = Cubic m/hr
ft3/d = Cubic ft/day m^3/d = Cubic m/day
Mft3/d = mega cubic feet/day Mm^3/d = mega cubic meters/day
BBL/S = Barrel/sec BBL/S = Barrel/sec
BBL/M = Barrel/min BBL/M = Barrel/min
BBL/H = Barrel/hr BBL/H = Barrel/hr
BBL/D = Barrel/day BBL/D = Barrel/day
MBL/D = mega barrels/day MBL/D = mega barrels/day
A-I/S = Acre-inch/sec
A-I/M = Acre-inch/min
A-I/H = Acre-inch/hr
A-I/D = Acre-inch/day
A-F/S = Acre-feet/sec
A-F/M = Acre-feet/min
A-F/H = Acre-feet/hr
A-F/D = Acre-feet/day