Chapter 2. Understanding the Keypad, Menu System & Displays
8 DM5E Operating Manual
2.1 Keypad Features (cont.)
Figure 2: DM5E Keypad and Key Functions
Select a probe setup
Select, adjust and confirm
operating settings
Thickness measurement display
Press to activate the functional control
(when present) above the key.
Press to launch the calibration process
or make on-screen selections. Press and
hold to power the instrument ON or OFF.
Press to adjust the value of the selected
parameter and for on-screen navigation.
Press to activate standard display modes
(shown here) and the optional display
modes (if installed). Optional display modes
include Data Recorder Contents.
To Next Page
Loading...
