GE DM5E - 4.3 Min Scan and Max Scan Measurement View Modes

Chapter 4. Measuring Thickness
40 DM5E Operating Manual
4.3 Min Scan and Max Scan Measurement View Modes
The MIN SCAN and MAX SCAN modes allow the user to continuously evaluate material thickness then, after the evaluation period is
complete, display the extreme (minimum or maximum) material thickness observed. During the evaluation period, thickness is displayed
along with the minimum and maximum observed thickness values (see Figure 15 below). A time-out feature allows a momentarily
uncoupling of the probe during the evaluation period. In these modes, the instrument will continue to collect and compare readings for as
long as the time-out period is not exceeded.
Figure 15: MAX SCAN Measurement View Mode