Appendix A. Supplemental Information
DM5E Operating Manual 69
A.2 Firmware Updates (cont.)
6. When prompted, press and hold the and keys for 3 seconds. The DM5E will enter re-programming mode. When the update
has been completed, the DM5E will automatically shut OFF.
IMPORTANT: All stored custom settings will be lost during the next step. However, stored Data Recorder files will not be affected.
7. Reset the operating software to purge the instrument’s memory.
A.3 Web Site Information
The following information is available on the GE Sensing & Inspection Technologies web site at www.geinspectiontechnologies.com:
• Up-to-date information on operating software
• Latest upgrade utility program
• Specifications
• New features
• Literature
• And much more!
To Next Page
Loading...
