Appendix A. Supplemental Information
70 DM5E Operating Manual
A.4 EMC Documentation
The following is the DM5E Declaration of EMC Compliance:
DM5E Ultrasonic Corrosion Thickness Gauge
Instrument Description: The DM5E is an ultrasonic thickness gauge capable of measuring materials using ultrasonic transducers operating
at frequencies from 5 to 15 MHz. This instrument displays a thickness calculated by the measured time of flight in the material at the
velocity programmed into the instrument. The instrument is intended for use as a portable thickness gauge in an industrial environment. The
instrument is not intended to be part of a closed control loop in an automated process control system.
Compliance Statement:
The DM5E complies with the following EN standards:
• EN55011: 2007
• EN61000-6-2: 2005
To Next Page
Loading...
