Chapter 4. Measuring Thickness
42 DM5E Operating Manual
4.5 B-SCAN Measurement View Mode
The B-SCAN mode (see Figure 17 below) allows the user to continuously display the material thickness in a graphical mode. During the
evaluation period, the thickness measurement is displayed along with the minimum and maximum thickness values. A time-out feature
allows a momentarily uncoupling of the probe during the evaluation period. In this mode, the instrument will continue to collect and
compare readings for as long as the time-out period is not exceeded. Pressing the SEND key will store the minimum value in the active file.
Figure 17: B-SCAN Measurement View Mode
To Next Page
Loading...
