GE DM5E - Chapter 5. Using the Optional Data Recorder

Chapter 5. Using the Optional Data Recorder
DM5E Operating Manual 45
Chapter 5. Using the Optional Data Recorder
Note: The instructions in this chapter apply only to instruments equipped with a Data Recorder.
When installed and activated, the Data Recorder option allows users to create Data Recorder files, store thickness readings (and the
accompanying B-SCAN, when desired), and navigate through file contents. In this chapter you will learn how to:
• Create Data Recorder files (see Section 5.1 on page 46)
• Recall and erase Data Recorder files (see Section 5.2 on page 49)
• Store thickness readings in Data Recorder files (see Section 5.3.1 on page 51)
• Navigate Data Recorder file locations to store or replace readings (see Section 5.3.2 on page 51)