GE Druck ADTS 505 - Installation Procedures

Druck ADTS 505 User Manual 2 - 1
K0260 Issue No. 8
2
2 INSTALLATION
2.1 Packaging
On receipt of the ADTS 505 check the contents of the packaging against the following lists:
i) ADTS 505 Air Data Test Set
ii) Power supply cable - 5 m, no line plug (regional line plugs require option C)
iii) Option A
comprising:
Hand terminal
Hand terminal cable - 18 m (option A only)
5 m hose - red
5 m hose - blue
Accessory Bag
iv) Option B
comprising:
Advanced hand terminal
Hand terminal cable - 18 m (option B only)
Cable, communications
Cable, power supply
Power pack
Accessory Bag
v) 3 m hose - red
vi) 3 m hose - blue
vii) User Manual (this publication)
viii) Quick Reference Guide K0274
ix) Kit, fuse/o-ring (also see Figure 2-1, item1)
2.2 Packaging for Storage or Transportation
To store the unit or to return the unit for calibration or repair carry out the following procedures:
1. Pack the unit as detailed in the following procedure.
2. To return the unit for calibration or repair complete the return goods procedure as
detailed in 2.3.