Druck ADTS 505 User Manual 5 - 7
K0260 Issue No. 8
5
On-screen Assessment (Figure 5-2)
This procedure enables real time assessment of the system. Each valve and transducer is
characterized to obtain maximum performance. Any values shown on the screen are an
indication and not a precise value.
To assess the system, enter a set-point and a rate so that achieving the set-point takes at
least 5 minutes. Once set and controlling, select setup and display the system data screen
using the menu selection below
F
IGURE 5-2 SYSTEM SCREEN FOR DIAGNOSIS
To Next Page
Loading...
