GE Druck ADTS 505

Druck ADTS 505 User Manual 6 - 1
K0260 Issue No. 8
6
6 REFERENCE AND SPECIFICATION
6.1 Introduction
This section includes a full description of each key-pad selection and function, the main
menu selections and functions and set-up selections and functions.
The available keys are:
F1 - F6
ALT Ps
SPEED Qc
MACH Pt
ROC Ps RATE
RATE
LEAK MEASURE/CONTROL
GROUND
HELP
SETUP
0 to 9
- 000
CLEAR/QUIT
DELETE
ENTER
.
Double key press:
ABORT (CLEAR/QUIT + ENTER)
6.2 Key-pad Selections and Functions
F1 - F6
 These function keys or soft-keys are used to select choices from menus. The main menu
choices are shown next to the keys. After making a menu choice, the display shows further
selections in a sub-menu or the display changes indicating a successful selection.
 When a sub-menu is displayed, press the appropriate function key to select the required
choice.
 CLEAR/QUIT can be used to leave a sub-menu without making a selection.