Druck ADTS 505 User Manual 3 - 5
K0260 Issue No. 8
3
(5) The system is now ready for use.
NOTES
1 The ADTS 505 is a continuous, self-monitoring system. If the system detects an error, the display
shows an error message. Lists of errors are detailed in Section 5, Fault Finding and Testing.
2 The display at power-up will be [QUAD] format (see above) unless changed in SETUP and [Save
Settings] selected.
(6) The connection of an optional hand terminal (option A or B) causes the front panel display to show
one of two messages:
or
To change between
these two displays, see
SETUP and
[Display], [Hand Term],
[Monitor] or [Message].
See paragraphs 3.4.1
and 3.9.
To Next Page
Loading...
