What does 'Ground I Failure' mean on my GE GEP Inverter and how to fix it?
A 'Ground I Failure' on your GE Inverter indicates that the ground current is too high. To resolve this, take off the inputs from the PV generator and check the peripheral AC system. Once the problem is cleared, reconnect the PV panel and check the Inverter status. If the issue persists, contact a local service office.
What to do if my GE Inverter is Over Temperature?
If your GE Inverter shows an 'Over Temperature' warning, it means the internal temperature is higher than the normal specified value. Try to reduce the ambient temperature and move the inverter to a cooler place. If the issue continues, contact a local service office.
What should I do if my GE GEP Inverter displays 'Utility Loss'?
If your GE Inverter indicates a 'Utility Loss', it means that it is not connected to the grid. Check if the power cable is properly connected to the grid and verify the availability of power from the grid.
What to do if my GE Inverter shows 'Vac Failure'?
If your GE Inverter displays a 'Vac Failure', it could be due to grid issues. First, the PV Inverter will automatically restart within 5 minutes if the grid returns to normal. Then, ensure the grid voltage conforms to specifications and that the neutral (N) wire and PE wire are well connected. If the problem persists, it may be necessary to contact a local service office.
Why is my GE GEP Inverter not displaying anything?
If your GE Inverter's display is blank, follow these steps: First, disconnect the DC switch and remove the DC connector. Measure the voltage of the PV string. Next, plug in the DC connector and reconnect the DC switch. If the voltage is less than 70 V, check the PV string configuration. If the voltage is higher than 180V and there's still no display, further assistance is needed.
How to resolve Ground I Failure on GE GEP?
To resolve a Ground I Failure on your GE Inverter, follow these steps: First, disconnect the DC switch and check the insulation of the PV string wiring to earth. Then, reconnect the DC switch. If the problem persists, further assistance is needed.
How to fix Isolation Failure on a GE Inverter?
To address an Isolation Failure on your GE Inverter, follow these steps: First, disconnect the DC switch and remove the DC connector. Check the impedance between PV (+) & PV (-) to earth. If the impedance is less than 100 kΩ, inspect the insulation of the PV string wiring to the earth. If the impedance is larger than 100 kΩ, further assistance is needed. Remove the AC connector and measure the impedance between neutral and PE. If it is larger than 10 kΩ, inspect the AC wiring.
What to do if my GE GEP shows Vac Failure?
If your GE Inverter is showing a Vac Failure, follow these steps: First, disconnect the DC switch and remove the AC connector. Then, measure the voltage between the line and neutral in the connector to ensure it conforms to the inverter's grid-connected specification. If it does not, check the grid wiring. If it does, connect the AC connector and reconnect the DC switch, allowing the inverter to connect automatically. If the problem continues, further assistance is needed.
What should I do if my GE Inverter displays 'PV Over Voltage'?
If your GE Inverter displays a 'PV Over Voltage' error, take these steps: First, disconnect the DC switch and remove the DC connector. Check the PV string voltage to ensure it does not exceed the input voltage specified for your inverter. If it does, reconfigure the PV panel string. If the problem continues, further assistance is required.
Lists the specific inverter models covered by this manual.
Identifies the intended readers of this user manual.
Explains the meaning of various warning symbols used in the manual.
Details the revision history and changes made to the document.
Provides general safety guidelines and precautions for inverter operation.
Outlines safety measures related to the DC input side of the inverter.
Outlines safety measures related to the AC output side of the inverter.
Specifies safety considerations during the inverter installation process.
Defines the necessary qualifications and training for personnel.
Declares compliance with relevant European Union directives.
Describes the intended use and application of the GEP inverter.
Illustrates the internal electrical circuit configuration of the inverter.
Lists the types of electrical grids compatible with the inverter.
Details the external physical characteristics and design of the inverter.
Identifies and describes the individual components and ports of the inverter.
Provides the physical measurements and size of the inverter unit.
Explains the status indicated by the inverter's LED lights and displays.
Describes the information and labels present on the inverter's identification plate.
Outlines the inspection process for the product upon delivery.
Lists all the items included in the inverter package.
Provides guidelines for storing the inverter in appropriate conditions.
Specifies the necessary environmental and site conditions for installation.
Details the criteria for selecting and preparing the inverter mounting support.
Specifies the correct orientation and tilt angles for inverter mounting.
Lists the tools recommended for performing the inverter installation.
Covers the general process and steps for installing the inverter.
Provides instructions for safely handling and moving the inverter.
Details the step-by-step procedure for physically mounting the inverter.
Highlights critical safety warnings before making electrical connections.
Provides instructions for correctly connecting the protective earth cable.
Details the procedure for connecting the DC power input cables from PV panels.
Step-by-step guide for connecting the DC input power cables.
Instructions for connecting the AC power output cable to the grid.
Lists essential checks to perform before energizing the inverter.
Describes the sequence of steps to safely power up the inverter.
Explains the function of the inverter's status indicators and control buttons.
Guides users on configuring inverter settings using the LCD screen.
Illustrates the navigation structure of the inverter's LCD menu.
Describes the purpose and function of various inverter parameters.
Instructions for updating the inverter's internal software using a USB drive.
Explains how to configure inverter settings using the mobile application.
Details the safe procedure for shutting down the inverter.
Provides instructions for safely detaching the inverter from its mounting.
Offers guidance on the environmentally responsible disposal of the inverter.
Lists common faults and their corresponding solutions for diagnosing issues.
Outlines regular maintenance tasks and their recommended schedules.
Presents the detailed technical specifications and operating data of the inverter.
To Next Page
General
