GE Giraffe Blue Spot PT Lite - Chapter 5: Specifications; 5.1 Electrical Specifications; 5.2 Environmental Specifications

Chapter 5: Specications
5.1 Electrical Specications
Device type: Class I
• Operation: Continuous operation
• Input Rating: 100-240VAC 50/60 Hz, 130-170VA
Note: To isolate the device from the supply mains:
- For a wall-connected device, unplug the power cord.
- For a device connected to a microenvironment’s accessory outlet, switch o the mains switch on
the back of the microenvironment.
5.2 Environmental Specications
5.2.1 Operating Conditions
Ambient Temperature 18 to 30°C
Relative Humidity 10 to 95% non-condensing
Atmospheric Pressure 64 kPa to 106 kPa
• Equipment not suitable for use in presence of ammable anaesthetic mixture with air or with oxygen or
nitrous oxide.
• IPX0 - Not protected from water ingress.
5.2.2 Transport and Storage Conditions
(While sealed in shipping packaging)
Temperature -20 to 60°C
Humidity 0 to 95% non-condensing relative humidity
Pressure 64 kPa to 106 kPa
29