Chapter 11: Replacement Procedures
This chapter describes the procedures used for replacement of the Girae Blue Spot PT Lite service parts.
After any replacement procedures, perform checkout procedures, as described in section “8.4”.
Always read all the warnings, cautions, notes, and other information provided in “Important Service Safety
Information” before starting any replacement or repair. All replacement and repair procedures shall be
performed by authorized service personnel only.
CAUTION:
Always perform electrical safety test after any replacement procedure.
NOTE: Standard service tools (such as a pair of small pliers, screwdrivers and nut drivers) and the provided
hex key tool are required to perform repair procedures.
63
To Next Page
Loading...
