How to fix TX LED when it does not light on GE iBox?
If the TX LED on your GE Controller isn't lighting up, it means the unit isn't transmitting data. Check the cabling to your modems. If you're connected to a modem or converter, make sure RTS, CTS, and DCD are enabled. If you're using a direct serial connection, try disabling RTS, CTS, and DCD.
How to fix system hangs on GE Controller?
If your GE Controller experiences a system hang, which may be due to a watchdog failure, attempt a reboot and clear the CCU error logs.
What to do if digital output coils are not in the state requested by the software Plant I/O Sub failure in GE iBox Controller?
If digital output coils are not in the state requested by the software Plant I/O Sub failure, it could be due to a hardware watchdog issue. Check the control voltage source fuses and voltage. You can also force it from WESMAINT.
What to do if RUN LED does not light on GE iBox?
If the RUN LED on your GE Controller doesn't light up, it could be because the unit isn't getting power or there's no BootROM. First, check that the power source is working. Then, make sure the BootROM is installed at U4XU4.
General| Brand | GE |
|---|---|
| Model | iBox |
| Category | Controller |
| Language | English |
An overview of the iBox, its functions, features, and patent protection.
Instructions for inspecting the shipping package and the iBox unit for damage.
Lists the required tools and ESD protective gear for installation procedures.
Details the iBox front panel, operation, maintenance, and input/output specifications.
Covers the main steps and guidelines for physically installing the iBox unit.
Provides critical rules for installation environment, power supply, grounding, and connections.
Explains the process of configuring the iBox using the SGConfig system.
Describes system checks to verify the proper functioning of the iBox software.
Provides instructions for addressing system malfunctions and interpreting error messages.
Warns about shock, burns, or death from hazardous voltages and outlines safety measures.
Explains the meaning of various product warning symbols used in the manual.
Outlines the main steps and guidelines for installing the iBox Kit.
Provides instructions and considerations for mounting the iBox Kit in a rack.
Details the configuration process for various iBox Kit components.
Step-by-step guide for configuring the Digi One IAP Ethernet Module.
Instructions for configuring the ADAM-4017+ DC Analog Input Module.
Methods for verifying the iBox Kit's operation using LEDs and pinging.
Guides on using LED indicators and checking configuration for troubleshooting kit issues.
To Next Page