•
Base plate assembly (mandatory) 2285048 – Refer to Table 2-1
•
If there is no integrated baseplate plan (2359194) delivered with S18101SG, please refer to
drawings 2359194 (Angio configuration Illustration 2-4) or 2359194 (Cardio configuration
Illustration 2-5). Please order locally the integrated base plate based on this plan.
•
Assembly and separation (Select kit) 2285050 – Refer to tables,
○
Above grade, Floor anchors without insert – 2285051.
○
Through bolts without insert – 2285646.
○
On grade, Floor anchors – 2286398.
○
Above grade, Floor anchors and insert – 2285052.
○
Through bolts and insert – 2285053.
○
Floor plate / Base plate Assembly – 2285632.
•
Templates (select kit) – 2285054 – Refer to Table 2-9
Angio/Cardio/Neuro templates – 2285056 (containing 2185979, 2127792 and 2360133
templates).
1.1 2285048 - Base Plate Assembly
Table 2-1:
Item Name Part # Description Quan. Notes
Baseplate 2285059 12 Hole Floor Baseplate 1 pc
Lift Plate 2290939 Lifting Straps 2 pc
Hex Head
Screw
5166535 Hex Head Screw 1/2”-13UNC L1
1/2” 12.9 Black
2 pc
Grease 2295599 Lithium grease lubricant 100g 2 pc
Doc 2230112-1-100 Vascular Gantry Baseplate and Ta‐
ble
1 pc
Doc 2229297-100 LCA/LCV+/LC+ System Baseplate
and Omega IV/V/EP Table Floor
Preparation
1 pc
Doc 2290880-2-100 Innova Pre-Installation Kit Install
Procedure
1 pc
NOTE: The 12 Gantry baseplate mounting screws are delivered with the system's Gantry. These
screws are:
•
cap screws 5166774; Screw Socket Head Cap 1/2”-20 UNF L1 1/2” 12.9 Black (used
when installing new system on old baseplate (US threads))
•
cap screws 2300939; Hex Head Cap screw; M12 40/40 Class 12.9 Black ; used to
attach L-brackets on table shipping pallet to positioner dolly for table positioning
(used when the new baseplate is metric threads)
Single Plane and Biplane Innova Systems Pre–Installation Kit Installation Procedures
GE Healthcare Direction 2290880-12-1EN, Revision 1
40 1 LC Positioner and Table Floor Preparation Kits
To Next Page
Loading...
