EasyManua.ls Logo

GE Innova Series - 2285050 - Assembly and Separation Select Kit; 2285051 - above Grade, Floor Anchors Without Insert; 2285646 - through Bolts Without Insert

GE Innova Series
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.3 2285050 – Assembly and separation select kit
1.3.1 2285051 – Above grade, Floor Anchors without insert
Table 2-3:
Item Name Part # Description Quan. Notes
Floor Anchor 46-302265P1 Floor Anchor Bolt; 5/8 - 10x6” - (16
mm) drilling. (16 mm) drilling.
12 anchors for Gantry and 4 an‐
chors for Table
16 pc Above Grade anchor mount‐
ing method hardware
Grout assy 2285055 - 10 kg Powdered Mortar Ardex
K-15
- RTV Silicon Rubber Adhesive
- 18 mm making tape adhesive
- Open cell foam
1 kit Used in constructing Gantry
grout dam
Dowel 2290937-2 Wood Dowel; (16 mm) diameter 12 pc
1.3.2 2285646 – Through bolts without insert
Table 2-4:
Item Name Part # Description Quan. Notes
Bolt, Hex 2296892 Through Bolt; M20 - 500-400
12 bolts for Gantry and 4 bolts for
Table
16 pc Through Bolt mounting
method hardware
Washer, Flat 99142204 Special Flat Washer for Through
Bolts; one for each bolt
16 pc same as above
Plate 2290941 Special Steel Spacer Plate; 4 in. x
4 in. (102 mm x 102 mm); one for
each bolt
16 pc same as above
Nut, Hex 99141607 Hex Nut M20 STL galvanized two
for each bolt
32 pc same as above
Grout assy 2285055 - 10 kg Powdered Mortar Ardex
K-15
- RTV Silicon Rubber Adhesive
- 18 mm making tape adhesive
- Open cell foam
1 kit Used in constructing Gantry
grout dam
Dowel 2290937 Wood Dowel; 24 mm diameter 12 pc
Single Plane and Biplane Innova Systems Pre–Installation Kit Installation Procedures
GE Healthcare Direction 2290880-12-1EN, Revision 1
42 1 LC Positioner and Table Floor Preparation Kits

Related product manuals