GE JB905 Technical Service Guide

– 21 –
10. Using rubber gloves to protect your hands,
carefully grasp the insulation which covers
the side of the range and roll it upwards to the
top of the range.
11. Tuck the insulation up under the 2 wire
hooks.
8. Remove the 3 screws and ground wire from
the bottom of the insulation retainer.
9. Remove the 2 wire hooks from the insulation
cover and remove the insulation cover.
Side Insulation Retainer
2 Terminal Lugs
Retaining Clip
Insulation
6. Label and disconnect the 2 element terminal
lugs.
7. Remove the 2 wires from the retaining clip on
the side insulation retainer.
(Continued next page)
Ground Wire
2 Wire Hooks
Insulation Cover
2 Screws
12. Remove the two screws which secure the
bake element to the frame.
13. Remove the screw and grounding wire.
Note: The channel is hinged on the right side.
14. Grasp the left end of the retaining channel,
swing it out, and remove it from the hinge slot
in the frame.
Grounding Wire
2 Screws
Retaining
Channel

GE JB905 Specifications

General

Brand	GE
Model	JB905
Category	Ranges
Language	English