GE LOGIQ 200 PRO Series User Manual

Quick Start 24
LOGIQ t 200PRO Series Quick Start
2234974–100 Rev. 0
Slope
Press Freeze to stop image acquisition.
Press Measurement three times. With the cursor in the M-Mode timeline area, a
“  ” cursor with a vertical dotted line is displayed.
Use the Trackball to position the measurement start point.
Press Set to fix the start point.
Use the Trackball to position the measurement end point.
Press Set to complete the measurement.
Set
Measurement Measurement Measurement
Set

GE LOGIQ 200 PRO Series Specifications

General

Brand	GE
Model	LOGIQ 200 PRO Series
Category	Medical Equipment
Language	English