GE LOGIQ 200 PRO Series User Manual

Quick Start 23
LOGIQ t 200PRO Series Quick Start
2234974–100 Rev. 0
Time Interval
Perform a time interval for calculations such as HR, PHT, and ET.
Press Measurement twice. A “  ” cursor with a vertical dotted line appears when
the cursor is in the M-Mode portion of the display.
Use the Trackball to move the cursor to the measurement start point. Press Set
to fix the first cursor.
Use the Trackball to move the end cursor to the measurement end point. Press
Set to complete the measurement.
Set
Measurement Measurement
Set

GE LOGIQ 200 PRO Series Specifications

General

Brand	GE
Model	LOGIQ 200 PRO Series
Category	Medical Equipment
Language	English