GE LOGIQ S6

GE HEALTHCARE
DIRECTION 5162630, REVISION 3 LOGIQ™ S6 SERVICE MANUAL
8-32 Section 8-3 - Software Loading Procedures (R7.7.x or later with BEP4)
8-3-8-7 Date and Time Setting
1.) Select Start > Settings > Control Panel > Date and Time.I
2.) Click on Time Zone tab.
3.) Select the appropriate time zone. Then click on Apply.
4.) Then click on Date & Time tab.
Figure 8-148 Date & Time
Figure 8-149 Time Zone