GE LOGIQ S6

GE HEALTHCARE
DIRECTION 5162630, REVISION 3 LOGIQ™ S6 SERVICE MANUAL
8-46 Section 8-3 - Software Loading Procedures (R7.7.x or later with BEP4)
8-3-10-6 Regional Setup (For the system with language other than English ONLY)
For Japanese Languages
You can set up the keyboard for Japanese. If you select Japanese, the following items display or enter
by Japanese.
• Patient name
• Exam comment in Patient screen and Worksheet
• Report/Direct Report free text, Insert Text
• Annotation, Annotation Library
• Error/Warning message
• DICOM/Worklist, Query/Retrieve, Image Storage, Printer, MPPS
1.) Select Utility> System> General>Regional Option Menu,
2.) Click on Languages tab.
3.) Check Install files for East Asian languages.
4.) Click on Apply.
5.) The system requires the re-boot automatically, shut down the system.
NOTICE
Do not change “Language used in menus and dialogs” option. It should be English.