GE HEALTHCARE
DIRECTION 5162630, REVISION 3 LOGIQ™ S6 SERVICE MANUAL
Section 8-3 - Software Loading Procedures (R7.7.x or later with BEP4) 8-63
8-3-11 Functional Check
8-3-11-1 Service Platform
1.) Click on Utility > Service. It will take about ten (10) seconds for activating.
2.) Make sure that CAPS is OFF (should be dimmed)
for password entry performed later.
3.) The Service Login window for Service Platform will be shown on the monitor display.
Figure 8-187 Service
Figure 8-188 CAPS OFF
OFF
ON
To Next Page
Loading...
Need help?
General
