GE Mentor EM

Copyright by GE Sensing & Inspection Technologies 50 Industrial Park Road Lewistown, PA 17044
3-2
04/03/2014
Mentor EM Portable Equipment User's Manual
LaunchingWorkows
1 – Use touch screen to select any workow
installed on the instrument.
2 – Select the workow’s starting point from a list
of options determined by the workow architect.
Selecting Resume begins the workow at the panel
last active.
Installing New
Workows
3 – Press to access workow les stored on
connected external devices or from GE's NDT
Solutions Center. Files must rst be added into
the active workow list (those that appear on the
desktop) before they can be launched.
4 – Choose a workow from the USB list (if one is
installed) or choose Select Location to access the
NDT Solutions Center (via an Internet connection).
5 – The NDT Solutions Center contains workows
for various applications.
6 – After selecting a le (it will turn blue), select Add
to install the workow in the instrument. The newly
installed workow joins others on the instrument’s
desktop.
Note: workow les have an iwp le extension.