GE MOTOR MANAGER 2 - Preset Counters and Timers

GE Power Management
MM2 Motor Manager 2 4-33
4 SETPOINTS 4.6 S5 MONITORING
4
4.6.3 PRESET COUNTERS AND TIMERS
PATH: SETPOINTS
ttttt
S5 MONITORING
tt
PRESET COUNTERS AND TIMERS
PRESET RUNNING HOURS:
0 HRS
Range: 0 to 65535; Step 1
Sets the number of Running Hours to a predetermined value.
PRESET STOPPED HOURS:
0 HRS
Range: 0 to 65535; Step 1
Sets the number of Stopped Hours to a predetermined value.
PRESET NUMBER OF
STARTS: X100
Range: 0 to 65535; Step 1
Sets the Number Of Starts to a predetermined value within 100 starts.
PRESET OVERLOAD
TRIPS: 0
Range: 0 to 65535; Step 1
Sets the number of Overload Trips to a predetermined value.
PRESET THERMISTOR
TRIPS: 0
Range: 0 to 65535; Step 1
Sets the number of Thermistor Trips to a predetermined value.
PRESET GROUND FAULT
TRIPS: 0
Range: 0 to 65535; Step 1
Sets the number of Ground Fault trips to a predetermined value.
PRESET SINGLE PHASE
TRIPS: 0
Range: 0 to 65535; Step 1
Sets the number of Single Phase trips to a predetermined value.
PRESET ACCELERATION
TRIPS: 0
Range: 0 to 65535; Step 1
Sets the number of Acceleration trips to a predetermined value.
PRESET UNDERCURRENT
TRIPS: 0
Range: 0 to 65535; Step 1
Sets the number of Undercurrent trips to a predetermined value.
PRESET UNDERPOWER
TRIPS: 0
Range: 0 to 65535; Step 1
Sets the number of Underpower trips to a predetermined value.
PRESET STALLED ROTOR
TRIPS: 0
Range: 0 to 65535; Step 1
Sets the number of Stalled Rotor trips to a predetermined value.
PRESET STALLED ROTOR
TRIPS: 0
Range: 0 to 65535; Step 1
Sets the number of Stalled Rotor trips to a predetermined value.
PRESET CONTROL
TRIPS: 0
Range: 0 to 65535; Step 1
Sets the number of Control trips to a predetermined value.
PRESET INTERLOCK
COUNTER: 0
Range: 0 to 65535; Step 1
Sets the number of Interlock Counter operations to a predetermined
value.