GE MOTOR MANAGER 2 User Manual

4-34 MM2 Motor Manager 2
GE Power Management
4.7 S6 FACTORY DATA 4 SETPOINTS
4
4.7 S6 FACTORY DATA 4.7.1 DESCRIPTION
This page contains information about the version of the MM2 and data for GE Power Management
service technicians. Setpoints Page 6 is divided into two sections, PRODUCT IDENTIFICATION and
FACTORY SERVICE DATA.
4.7.2 PRODUCT FIRMWARE
PATH: SETPOINTS
tttttt
S6 FACTORY DATA
t
PRODUCT FIRMWARE IDENTIFICATION
4.7.3 PRODUCT MODEL IDENTIFICATION
PATH: SETPOINTS
tttttt
S6 FACTORY DATA
tt
PRODUCT MODEL IDENTIFICATION
4.7.4 FACTORY SERVICE DATA
PATH: SETPOINTS
tttttt
S6 FACTORY DATA
ttt
FACTORY SERVICE DATA
MOD NUMBER(S): 000
Range: for identification only
If the MM2 has been modified so that it is no longer a standard model, a
modification number will be displayed in this message.
MOTOR MANAGER 3
VERSION: X.XX
Range: for identification only
This message identifies the MM2 main firmware version.
BOOT PROGRAM
VERSION: X.XX
Range: for identification only
This message identifies the MM2 Boot Program version.
DISPLAY PROGRAM
VERSION: X.XX
Range: for identification only
This message identifies the MM2 Display Program version (when the
display option has been ordered).
SUPERVISOR PROGRAM
VERSION: X.XX
Range: for identification only
This message identifies the MM2 Supervisor Program version.
MM2 HARDWARE
REVISION: X.XX
Range: for identification only
This message identifies the Hardware revision the currently loaded
firmware was compiled for.
SERIAL NUMBER:
D7191234
Range: for identification only
This message identifies the MM2 serial number.
DATE OF MANUFACTURE:
February 1, 1996
Range: for identification only
This message identifies the date of manufacture.
FACTORY SERVICE
PASSCODE: 0
Range: 0 to 9999
his message identifies the MM2 order code.

GE MOTOR MANAGER 2 Specifications

General

Brand	GE
Model	MOTOR MANAGER 2
Category	Controller
Language	English