GE MOTOR MANAGER 2 - 6.5 MEMORY MAP

GE Power Management
MM2 Motor Manager 2 6-19
6 COMMUNICATIONS 6.5 MEMORY MAP
6
6.5 MEMORY MAP 6.5.1 DESCRIPTION
The data stored in the MM2 is grouped into two areas: setpoints and actual values. Setpoints can be
read and written by a master computer. Actual Values can be read only. All Setpoints and Actual Val-
ues are stored as two byte values. That is, each register address is the address of a two byte value.
Addresses are listed in hexadecimal. Data values (Setpoint ranges, increments, factory values) are
in decimal.