GE MOTOR MANAGER 2 - Abbreviations

5-2 MM2 Motor Manager 2
GE Power Management
5.1 OVERVIEW 5 ACTUAL VALUES
5
Press the STORE key and the display will confirm that the default message has been deleted. If the
message was not a current default message, the display will read:
5.1.3 ABBREVIATIONS
The following abbreviations are used in the Actual Values messages.
• A, AMPS: Amperes
• kW: Kilowatts
• kWhr: Kilowatt hours
• MIN: Minutes
• N/O: Normally Open
• O/L: Overload
• s: Seconds
Figure 5–1: MESSAGE SUMMARY
NOT A SELECTED
DEFAULT MESSAGE
]] ACTUAL VALUES
]] A1: DATA
]] ACTUAL VALUES
]] A2: STATUS
]] ACTUAL VALUES
]] A3: INPUTS
]] ACTUAL VALUES
]] A4: STATISTICS
] MOTOR DATA
]
] PROCESS DATA
]
] PROGRAMMABLE
] MESSAGE
] TRIP DATA
]
] ALARM DATA
]
] MOTOR STATUS
]
] INPUT CONTACTS
] STATUS
] TIMERS
]
] COUNTERS
]