GE Multilin EPM 6000 - Installation; Mechanical Installation

EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE 3–1
EPM 6000 Multi-function Power
Metering System
Chapter 3: Installation
GE Consumer & Industrial
Multilin
Instal lation
3.1 Mechanical Installation
3.1.1 Dimensions
The EPM 6000 meter can be installed using a standard ANSI C39.1 (4" round) or an IEC
92 mm DIN (square) form. In new installations, simply use existing DIN or ANSI punches. For
existing panels, pull out old analog meters and replace with the EPM 6000. The various
models use the same installation. See Wiring Diagrams on page 3–9 for various Wye and
Delta wiring diagrams.
FIGURE 3–1: Bezel, Side, and Back Dimensions