CHAPTER 4: USING THE METER
EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE 4–7
Z Press the RIGHT button to display the rSt ALL? YES message.
Resetting the maximum and minimum value requires entry of a four-digit password, if
enabled in software.
Z Press ENTER to display the password screen.
If password is enabled in the software, the screen displays the
PASS message in the “A”
screen and 4 dashes in the “B” screen, with the left-most digit flashing.
Z Using the DOWN button, select 0 to 9 for the flashing digit.
Z When the desired number appears, use the RIGHT button to select
it and move to the next digit.
Z When all four password digits have been selected, press ENTER.
If the correct password has been entered, the
rSt ALL donE message appears and the
screen returns to auto-scroll the parameters.
To Next Page
Loading...
