16–12 MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
SNMP CHAPTER 16: SNMP
The following window illustrates changes to the SNMP community parameters. It is
recommended to change the community strings from the default values of public and
private to other values.
Z When done changing the community strings, click OK.
Multiple managers can be added as shown below.
Z When adding SNMP manager stations, click on the Add button on the
SNMP menu screen.
Z Make sure that each station can be pinged from the switch by using the
Configuration > Ping menu.
To Next Page
Loading...
