GE NX-10 Installation Guide

NX-10 Expander Installation Guide
149
LOC DESCRIPTION DEFAULT PROGRAMMING DATA
13 RETURN EMAIL NAME OF THIS MODULE (char 1-16) This is an e-mail
address the messages
are sent from,
14
RETURN EMAIL NAME OF THIS MODULE (char 17-32)
15
RETURN EMAIL NAME OF THIS MODULE (char 33-48)
16
RETURN EMAIL NAME OF THIS MODULE (char 49-64)
17-28
RESERVED
29
EMAIL ACCOUNT #1 (char 1-16) This is an e-mail
address the messages
are sent to, for
example,
user@yourdomain.com
Notes: 1) Make sure
the account works
before you program it.
2) Keep good records
since email addresses
change more often
than most other items.
30
EMAIL ACCOUNT #1 (char 17-32)
31
EMAIL ACCOUNT #1 (char 33-48)
32
EMAIL ACCOUNT #1 (char 49-64)
33
EMAIL ACCOUNT #2 (char 1-16)
34
EMAIL ACCOUNT #2 (char 17-32)
35
EMAIL ACCOUNT #2 (char 33-48)
36
EMAIL ACCOUNT #2 (char 49-64)
37
MAIL SERVER (char 1-16)
38
MAIL SERVER (char 17-32)
39
MAIL SERVER (char 33-48)
40
MAIL SERVER (char 49-64)
41-44
RESERVED
45
IP ADDRESS FOR THIS MODULE 0.0.0.0
46
IP ADDRESS FOR PRIMARY RECEIVER 0.0.0.0
47
IP ADDRESS FOR SECONDARY RECEIVER 0.0.0.0
48
IP ADDRESS FOR ON-SITE EVENT RECORDER 0.0.0.0
49-50
RESERVED
51
IP ADDRESS MAIL SERVER 0.0.0.0
52
IP ADDRESS OF GATEWAY 0.0.0.0
53
IP ADDRESS FOR DOWNLOAD COMPUTER 0.0.0.0
54
IP ADDRESS SUBNET MASK 255.255.255.0
55
RECEIVER ALARM PORT 9-9-9-9
56
RECEIVER DOWNLOAD PORT 9-9-9-8
57
EMAIL PORT 0-0-2-5
58-59
RESERVED
60
ACCOUNT NUMBER (Hex) 00001000 Note: Add leading
zeros!!
61
RECEIVER NUMBER (Decimal) 0001
62
LINE NUMBER (Decimal) 0001
TIMERS & COUNTERS USED
SEG 1 – Number of network attempts 2
SEG 2 – Time in seconds for overall network attempt 30
63
SEG 3 – Polling time in seconds 10
64
ACCOUNT NUMBER FOR PARTITION 1 00000000
65
ACCOUNT NUMBER FOR PARTITION 2 00000000
66
ACCOUNT NUMBER FOR PARTITION 3 00000000

GE NX-10 Specifications

General

Brand	GE
Model	NX-10
Category	Security System
Language	English