GE RX3i - Page 229

Chapter 12. Diagnostics
216 PACSystems* RX7i & RX3i TCP/IP Ethernet Communications User Manual GFK-2224Q
Status
Description
23
Bits
Rack-based and RX7i
Embedded
RX3i Embedded
RX3i CPE330
24
48
Channel 16:
Modbus TCP Client - Reserved
SRTP Client - Channel Error
Channel 16:
Modbus TCP Client -
Reserved
SRTP Client - Channel Error
Channel 16:
Modbus TCP Client - Reserved
SRTP Client - Channel Error
49–78
Channels 17–31
Reserved
Channels 17–31
79
Channel 32 Status
SRTP: Data Transfer
Modbus TCP Client: Channel
Open
Reserved
Channel 32 Status
SRTP: Data Transfer
Modbus TCP Client: Channel Open
80
Channel 32:
Modbus TCP Client - Reserved
SRTP Client - Channel Error
Reserved
Channel 32:
Modbus TCP Client - Reserved
SRTP Client - Channel Error
23
The original information is located in GFK-2224L, TCP/IP Ethernet Communications for PACSystems RX3i and
RX7i from June 2013
24
For CPE330: LAN1 is the LAN (NIC) that contains the unswitched port in the CPE330. This is the port similar to
the CPE310. This port negotiates up to 1 Gbps. LAN2 is the LAN (NIC) that contains the switched ports in the
CPE330. There are 2 ports in this LAN. These ports negotiate up to 1 Gbps.